1.Plate adopts herringbone structure, high heat transfer efficiency;

2.Plate surface and fluids in a channel of high turbulence, low level of scale plates, low liquid holdup;

3.The frame is made of carbon steel, and the structure is relatively simple;

4.Through the edge of the plate structure, making the medium plate and parts are the same material .meeting the demand for variety of media at the same time, greatly reduce the material cost of the equipment, reducing the initial investment;

5.When the plate was blocked , you  can remove for cleaning around.

1.Compact structure, small covering area , high efficiency, and high pressure (up to a maximum of 4.0Mpa), resistant to high temperatures (temperatures up to ~ 300℃), reliable operation.

2.High heat transfer efficiency: heat exchange medium is realized through the plate,the plates was pressed by special mould , the structure like removable plate heat exchanger. It has  high heat transfer efficiency,Large flow , small fluid pressure drop, less heat loss and so on.

3.Easy and flexible: using one mold can press different length and specification of plates, forming the same width products,  meeting more needs of working conditions.

4.Applies range wide: the plates and the pressure plate both using welding structure, it can work well  for temperature ≤ 300 ℃, pressure ≤ 4.0Mpa or the media has corrosion of occasions and flammable.easy burst,toxic media and the high environment requirements security , and liquid media of cooling, warming, evaporation, Therefore, Both the advantages of  plate heat exchanger, with  high temperature & pressure .